Kyocera TASKalfa 2552ci - Manual (Page 538)

10-27
Troubleshooting > Troubleshooting
The machine is emitting
steam in the area around
the paper ejection slot. Check the room temperature to see
if it is low, or if damp paper was
used. Depending on the printing
environment and the paper's
condition, the heat generated during
printing will cause the moisture in
the paper to evaporate, and the
steam emitted may look like smoke.
This is not a problem, and you can
continue printing. If the steam
concerns you, raise the room
temperature, or replace the paper
with a newer, dryer paper. ―
*1 You can also enter a full computer name as the host name (for example, pc001.abcdnet.com).
*2 You can also enter login user names in the following formats:
Domain_name/user_name (for example, abcdnet/james.smith)
User_name@domain_name (for example, james.smith@abcdnet)
Symptom Checkpoints Corrective Actions
Reference
Page