Kyocera TASKalfa 2552ci - Manual (Page 94)

2-27
Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
Login
Normal login
1 Enter the login user name and login password to login.
1
If this screen is displayed during operations, select [Login User Name] to enter the login
user name.
2
[Login Password] > Enter the login password > [OK]
2 Select [Login].
NOTE
The factory default login user name and login password are set as shown below.
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
Character Entry Method (page 11-10)
NOTE
• [# Keys] can be selected to enter the number with the numeric keys on the operation
panel.
• If [Network Authentication] is selected as the user authentication method,
authentication destinations are displayed and either [Local] or [Network] can be
selected as the authentication destination.
• To authenticate by ID card, select [ID Card Login].
Model Name Login User Name Login Password
TASKalfa 2552ci 2500 2500
TASKalfa 3252ci 3200 3200
TASKalfa 4052ci 4000 4000
TASKalfa 5052ci 5000 5000
TASKalfa 6052ci 6000 6000
Login
User Name
Login
Status
Login
Password
abcdef
********
# Keys
Cancel
# Keys
lg0301
1
2
3