Adjustment/maintenance, Overview of adjustment/maintenance, Color registration procedure – Kyocera TASKalfa 2552ci User Manual

Page 561: Adjustment/maintenance -50

Advertising
background image

10-50

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

Overview of Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.

The table below lists the item you can carry out.

Color Registration Procedure

When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to
correct the color position of each of cyan, magenta and yellow to resolve color drift.

Auto registration and manual registration are available for Color Registration. Color drift can be largely corrected through
auto registration. However, if it is not resolved or to perform more detailed settings, use the manual registration.

Auto Correction

1

Load paper.

Item

Description

Reference Page

Color Registration
Procedure

Correct the color position to resolve color drift.

page 10-50

Tone Curve Adjustment

When the printed output tone may differ from the original, perform
this function to ensure consistency with the original tone.

page 10-54

Drum Refresh

Remove image blur and white dots from the printout.

page 10-55

Calibration

Calibrate the device to ensure correct toner overlapping and
consistency with the original tone.

page 10-55

Laser Scanner Cleaning

Remove vertical white lines from the printout.

page 10-56

Developer Refresh

Adjust the printed image that is too light or incomplete, even though
there is enough toner.

page 10-56

IMPORTANT

Before performing color registration, be sure to perform Calibration. If color drift remains, perform color
registration. By performing color registration without performing Calibration, the color drift will be resolved
once, however, it may cause the serious color drift later.

Calibration on page 10-55

Advertising