Kyocera TASKalfa 2552ci - Manual (Page 279)

5-71
Operation on the Machine > Manual Staple
Manual Staple
You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple
sort mode before starting copying, or when you want to staple originals.
Maximum number of sheets available for manual stapling
Use the keys on the control section of the Finisher (optional) for manual stapling.
1 Press the stapling position key on the stapling control section.
The shutter of the paper exit area is opened and this equipment enters into the manual staple
mode.
2 Set the staple position.
Press the stapling position key to select the stapling position
(Back / Front / 2 Points ).
Operation is not possible while the stapling position lamps are blinking. Operate after the
lamps light solidly.
NOTE
• This function requires the optional Document Finisher:
4,000-Sheet Finisher (page 11-29)
• If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key
LEDs all blink. Add staples.
Replacing Staples (4,000-Sheet Finisher) (page 10-13)
• Manual stapling cannot be executed when the machine is in operation.
Paper size
Paper weight
52 - 90 g/m
2
(14.0 - 24.0 lb. Bond)
91 - 105 g/m
2
(24.3 - 28.0 lb. Bond)
A4, A4-R, B5, Letter, Letter-R, 16K 65 sheets 55 sheets
A3, B4, Folio, Ledger 30 sheets 30 sheets
1 Stapling position lamps
2 Stapling position key
3 Stapling key / lamp
1 2 3