Kyocera TASKalfa 2552ci - Manual (Page 305)

6-25
Using Various Functions > Functions
Collate/Offset
Offsets the output by page or set.
Item Image Description
Collate Scans multiple originals and delivers complete sets of
copies as required according to page number.
Offset Without Document Finisher (Option) Printed copies are produced after rotating each set (or
page
*1
) by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected
paper tray must be loaded in a different orientation in a
different paper tray.
The paper sizes supported in Offset: A4, B5, Letter and
16K.
*1 If [Off] is selected for "Collate" setting, [Each Page] appears. When [On] is selected, [Each Set] appears.
With Document Finisher (Option) Printed copies are segregated after each set of copies (or
after each page
*1
).
NOTE
• The optional Document Finisher is required.
Inner Finisher (page 11-28)
1,000-Sheet Finisher (page 11-29)
4,000-Sheet Finisher (page 11-29)
• The paper sizes supported in Offset: A3, A4, B4, B5,
216×340 mm, Ledger, Letter, Legal, Oficio II, 8K and
16K.
Copy
Org./Paper/
Finishing
Custom
Box
Functions USB
Memory
Functions