Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 171)

Unified IP MIB Reference 143
53-1002549-02
Image version
snAgSoftwareFeature
brcdIp.1.1.2.1.41
Syntax: OCTET STRING Read-only Contains a bit string representing the software feature of the running
software image. Each bit can have one of the following values:
•
0 – The feature is not available
•
1 – The feature is available
Bit 0 is the least significant bit of an octet, and bit 7 is the most
significant bit of an octet:
•
Octet 0, bit 0 – RMON
•
Octet 0, bit 1 – IPX switching
•
Octet 0, bit 2 – Server Load Balancing
•
Octet 0, bit 3 – Layer 3 filter in switch
•
Octet 0, bit 4 – IPX routing
•
Octet 0, bit 5 – AppleTalk routing
•
Octet 0, bit 6 – IP multicast routing
•
Octet 0, bit 7 – Local access control
•
Octet 1, bit 0 – BGP routing
•
Octet 1, bit 1 – Loopback interface
•
Octet 1, bit 2 – BigIron multi-management module
•
Octet 1, bit 3 – BigIron SYSIF II
•
Octet 1, bit 4 – BigIron POS support
•
Octet 1, bit 5 – AppleTalk cable VLAN
•
Octet 1, bit 6 – 64 subnet
•
Octet 1, bit 7 – multi-slot trunk
•
Octet 2, bit 0 – TACACS
•
Octet 2, bit 1 – Gigabit Ethernet port auto-negotiation mode
•
Octet 2, bit 2 – FSRP
•
Octet 2, bit 3 – Exodus requested OSPF enhancement
•
Octet 2, bit 4 – OSPF NSSA
•
Octet 2, bit 5 – POS
•
Octet 2, bit 6 – QoS
•
Octet 2, bit 7 – Single Span
•
Octet 3, bit 0 – Fast Span
•
Octet 3, bit 1 – Base Layer 3
•
Octet 3, bit 2 – Static log buffer
•
Octet 3, bit 3 – Layer 2 POS
•
Octet 3, bit 4 – BI15K
•
Octet 3, bit 5 – Layer 2 ATM
•
Octet 3, bit 6 – ATM
•
Octet 3, bit 7 – NETFLOW
Name, OID, and syntax Access Description