Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 522)

494 Unified IP MIB Reference
53-1002549-02
BGP4 route map match table
snBgp4RouteMapMatchAddressFilter
brcdIp.1.2.11.13.1.1.5
Syntax: OCTET STRING Read-write Identifies the address filter number that this route must
match.
This is a number from 1 through 0xFFFF. The incoming
and outgoing list can have a maximum of 10 entries
each. Each number consists of two octets. There can be
a total of 20 octets in this object.
snBgp4RouteMapMatchMetric
brcdIp.1.2.11.13.1.1.6
Syntax: Integer32 Read-write Compares the route’s MED (metric) to this value. There
can be up to 20 octets in this object.
snBgp4RouteMapMatchNextHopList
brcdIp.1.2.11.13.1.1.7
Syntax: OCTET STRING Read-write Compares the IP address of the route’s next hop to the
IP address filters in this route.
This is a number from 1 – 0xFFFF, represented by two
octets. The incoming and outgoing list can have a
maximum of 16 entries each. There can be a total of 32
octets in this object.
snBgp4RouteMapMatchRouteType
brcdIp.1.2.11.13.1.1.8
Syntax: Integer Read-write Determines the OSPF route type to match:
•
none(0)
•
external(1)
•
externalType1(2)
•
externalType2(3)
•
internal(4)
•
local(5)
Currently only externalType1(2), externalType2(3), and
internal(4) are supported for SNMP-SET.
snBgp4RouteMapMatchTagList
brcdIp.1.2.11.13.1.1.9
Syntax: OCTET STRING Read-write Identifies the community tag access list that this route
must match.
This is a number represented by an octet strings. There
can be up to 32 octets in this object.
snBgp4RouteMapMatchRowMask
brcdIp.1.2.11.13.1.1.10
Syntax: Integer32 Read-write This object is used together with the MIB objects above
in the same VARBIND to set and reset any MIBs in the
table. The bit number is referred to the
snBgp4RouteMapMatchEntry number of each row in
the table:
•
The bit is ON - Means set
•
The bit is OFF - Means reset
snBgp4RouteMapMatchAsPathAccess
List
brcdIp.1.2.11.13.1.1.11
Syntax: OCTET STRING Read-write Indicates which BGP AS-Path access list this route must
match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five sets of four octets.
snBgp4RouteMapMatchCommunityLis
t
brcdIp.1.2.11.13.1.1.12
Syntax: OCTET STRING Read-write Indicates which BGP community access list this route
must match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five sets of four octets.
snBgp4RouteMapMatchAddressAcces
sList
brcdIp.1.2.11.13.1.1.13
Syntax: OCTET STRING Read-write Indicates which BGP address access list this route must
match.
This is an integer from 1 through 0xFFFFFFFF, consisting
of five sets of two octets.
Name, OID, and syntax Access Description