Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 407)

Unified IP MIB Reference 379
53-1002549-02
TM multicast VOQ statistics table
TM multicast VOQ statistics table
The Traffic Manager multicast VOQ statistics table contains information about the queue-related
statistics. Use the show tm-voq-stat src_port [ethernet | pos] <slot/port> multicast [<priority> |
all] CLI command for information about the TM multicast queue-related statistics.
NOTE
The following table contains information about the TM multicast VOQ statistics on the
NI-MLX-1Gx48-T, NI-MLX-1Gx24, NI-MLX-10Gx8, BR-MLX-100Gx2, and all the POS modules.
brcdTMUcastQStatsWREDDroppedByte
s
brcdIp.1.14.2.2.3.1.15
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues on
the TM but dropped due to WRED.
brcdTMUcastQStatsMaxQDepthSinceLa
stRead
brcdIp.1.14.2.2.3.1.16
Syntax: Counter64 Read-only Indicates the maximum queue depth since last access
to read.
brcdTMUcastQStatsQSize
brcdIp.1.14.2.2.3.1.17
Syntax: Unsigned32 Read-only Shows the current size of the queue.
brcdTMUcastQStatsCreditCount
brcdIp.1.14.2.2.3.1.18
Syntax: Unsigned32 Read-only Shows the current credit count of the queue.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdTMMcastQStatsTable
brcdIp.1.14.2.2.4 None The Traffic Manager multicast VOQ statistics table.
brcdTMMcastQStatsSlotId
brcdIp.1.14.2.2.4.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be
physically present and operationally up.
brcdTMMcastQStatsTMDeviceId
brcdIp.1.14.2.2.4.1.2
Syntax: Unsigned32 None Shows the TM device ID that uniquely identifies the
Network Processor TM within a line card in the
system.
brcdTMMcastQStatsPriority
brcdIp.1.14.2.2.4.1.3
Syntax: Integer None Shows the priority of the packets that will be stored
in the queue. Two consecutive priorities are stored
in one multicast queue. There are 4 multicast
queues per TM for 8 priorities:
•
Priority1And2 (1)
•
Priority3And4 (3)
•
Priority5And6 (5)
•
Priority7And8 (7)
brcdTMMcastQStatsDescription
brcdIp.1.14.2.2.4.1.4
Syntax: DisplayString Read-only This object gives the range of ports serviced by
brcdTMMcastQStatsTMDeviceId and priorities
serviced by the queue.