Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 208)

180 Unified IP MIB Reference
53-1002549-02
Hardware integrated central buffer manager counter table
Hardware integrated central buffer manager counter table
The following table provides information for the Integrated Central Buffer Manager (ICBM).
NOTE
The objects in the following table are not supported on the Brocade MLXe, Brocade NetIron MLX,
Brocade NetIron XMR, Brocade NetIron CES, Brocade NetIron CER series devices, and FastIron
devices.
Name, OID, and syntax Access Description
snCpuProcessTable
brcdIp.1.1.2.11.2 None System process utilization table.
snCpuProcessName
brcdIp.1.1.2.11.2.1.1
Syntax: DisplayString Read-only Name of the process.
snCpuProcess5SecUtil
brcdIp.1.1.2.11.2.1.2
Syntax: Gauge Read-only Statistics collected during the last 5 seconds of process utilization.
Divide this number by 100 to get the percentage utilization. It can
have a value 0 or a value between 100 to 10000 in multiples of
100. If the agent is queried immediately after turning on the CPU
usage and 5 seconds have not been elapsed, then the data will not
be available. Returns the data for the actual elapsed time for the
NetIron devices.
snCpuProcess1MinUtil
brcdIp.1.1.2.11.2.1.3
Syntax: Gauge Read-only Statistics collected during the last 1 minute of process utilization.
Divide this number by 100 to get the percentage utilization. It can
have a value 0 or a value between 100 to 10000 in multiples of
100. If the agent is queried immediately after turning on the CPU
usage and 1 minute have not been elapsed, then the data will not
be available. Returns the data for the actual elapsed time for the
NetIron devices.
snCpuProcess5MinUtil
brcdIp.1.1.2.11.2.1.4
Syntax: Gauge Read-only Statistics collected during the last 5 minutes of process utilization.
Divide this number by 100 to get the percentage utilization. It can
have a value 0 or a value between 100 to 10000 in multiples of
100. If the agent is queried immediately after turning on the CPU
usage and 5 minutes have not been elapsed, then the data will not
be available. Returns the data for the actual elapsed time for the
NetIron devices.
snCpuProcess15MinUtil
brcdIp.1.1.2.11.2.1.5
Syntax: Gauge Read-only Statistics collected during the last 15 minutes of process utilization.
Divide this number by 100 to get the percentage utilization.
NOTE: This object is not supported on Brocade NetIron devices.
snCpuProcessRuntime
brcdIp.1.1.2.11.2.1.6
Syntax: Counter Read-only Process runtime in milliseconds.
snAgentCpuProcessEnable
brcdIp.1.1.2.11.3
Syntax: EnabledStatus Read-write Enables the CPU utilization statistics collection.