Snrtatoutzipnetinfopkt s, Snrtatinddppkts, Snrtatoutddppkts – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 651: Snrtatforwardedddppk ts, Snrtatindeliveredddpp kts, Snrtatdroppednoroute ddppkts, Snrtatdroppedbadhop countsddppkts, Snrtatdroppedotherre asonsddppkts, Snrtatinaarppkts, Snrtatoutaarppkts
Unified IP MIB Reference
623
53-1002549-02
AppleTalk socket priority table
AppleTalk socket priority table
The following table shows the priority-level assigned to each QoS socket. By default, all AppleTalk
sockets are in the best effort queue (chassis devices) or the normal queue (stackable devices).
snRtATOutZipNetInfoPkt
s
brcdIp.1.2.10.1.19
Syntax: Counter
Read-only
Shows the total number of ZIP network information packets that were
transmitted by this device.
snRtATInDdpPkts
brcdIp.1.2.10.1.20
Syntax: Counter
Read-only
Shows the total number of DDP datagrams that were received by this
device.
snRtATOutDdpPkts
brcdIp.1.2.10.1.21
Syntax: Counter
Read-only
Shows the total number of DDP datagrams that were transmitted by this
device.
snRtATForwardedDdpPk
ts
brcdIp.1.2.10.1.22
Syntax: Counter
Read-only
Shows the number of input DDP datagrams whose DDP final destination
was not this device. The device attempted to forward the datagrams to
that final destination.
snRtATInDeliveredDdpP
kts
brcdIp.1.2.10.1.23
Syntax: Counter
Read-only
Shows the total number of input DDP datagrams whose final DDP
destination is this device.
snRtATDroppedNoRoute
DdpPkts
brcdIp.1.2.10.1.24
Syntax: Counter
Read-only
Shows the total number of DDP datagrams dropped because this device
could not find a route to their final destination.
snRtATDroppedBadHop
CountsDdpPkts
brcdIp.1.2.10.1.25
Syntax: Counter
Read-only
Shows the total number of input DDP datagrams that were dropped
because this device was not their final destination and their hop count
exceeded 15.
snRtATDroppedOtherRe
asonsDdpPkts
brcdIp.1.2.10.1.26
Syntax: Counter
Read-only
Shows the total number of DDP datagrams dropped for various reasons.
For example, the device ran out of resources so the datagrams were
dropped.
snRtATInAarpPkts
brcdIp.1.2.10.1.27
Syntax: Counter
Read-only
Shows the total number of AppleTalk ARP packets received by this
device.
snRtATOutAarpPkts
brcdIp.1.2.10.1.28
Syntax: Counter
Read-only
Shows the total number of AppleTalk ARP packets that were transmitted
by this device.
Name, OID, and syntax
Access
Description