Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 233)

Unified IP MIB Reference 205
53-1002549-02
Switch port information
snSwIfStatsOutKiloBitsP
erSec
brcdIp.1.1.3.3.5.1.55
Syntax: Unsigned32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the bit rate, in kilobits per second, transmitted from a 10 Gigabit
or faster interface within a five-minute interval.
snSwlfStatsInJumboFram
es
brcdIp.1.1.3.3.5.1.56
Syntax: Counter64 Read-only The total number of jumbo packets received on the interface.
This always returns 0 when applied to Brocade MLXe router, Brocade
NetIron XMR, and Brocade NetIron MLX devices.
snSwlfStatsOutJumboFra
mes
brcdIp.1.1.3.3.5.1.57
Syntax: Counter64 Read-only The total number of jumbo packets transmitted out of the interface.
This always returns 0 when applied to Brocade MLXe router, Brocade
NetIron XMR, and Brocade NetIron MLX devices.
snSwlfSInfoMirrorMode
brcdIp.1.1.3.3.5.1.58
Syntax: Integer Read-only Provides the mirror mode status as described:
•
disable(0)
•
enable(1)
snSwlfMacLearningDisab
le
brcdIp.1.1.3.3.5.1.59
Syntax: TruthVal Read-write DIsplays the status of MAC learning on an Ethernet port.
For POS ports, a Get operation will return the default value and a Set
operation will return an error.
snSwIfInfoL2FowardEnab
le
brcdIp.1.1.3.3.5.1.60
Syntax: Integer Read-write Displays the status of the cluster Layer 2 forward feature on an Ethernet
port. The STP packets coming from the MCT VLANs is dropped when the
object is set to the disabled(2) state.
•
enabled(1)
•
disabled(2)
•
globalConfig(3)
NOTE: The snSwIfInfoL2FowardEnable object has more preference than
the brcdMctL2Forward object for the interface when set to
enabled(1) or disabled(2). When set to globalConfig(3), the status
of the brcdMctL2Forward object is applied for the interface.
snSwIfInfoAllowAllVlan
brcdIp.1.1.3.3.5.1.61
Syntax: TruthVal Read-write Specifies allowing all VLAN packets for Policy-Based Routing (PBR).
Name, OID, and syntax Access Description