Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 750)

722 Unified IP MIB Reference
53-1002549-02
General traps for the Brocade NetIron devices
snTrapTemperatureOK
brcdIp.0.1001 snAgGblTrapMessage Critical The actual temperature reading on the
device is below the warning temperature
threshold.
Samples trap message:
Switch Fabric 2 temperature
30.2 C degrees is normal
Switch Fabric 2 temperature
30.2 C degrees is normal
Linecard Module %d PCB
temperature 30.2 C degrees is
normal
Linecard Module %d XPP
temperature 30.2 C degrees is
normal
Active mgmt CPU temperature
30.2 C degrees is normal
Standby mgmt CPU temperature
30.2 C degrees is normal
snTrapCAMOverflow
brcdIp.0.1002 snAgGblTrapMessage Alerts One of the IP CAM levels is full.
Sample trap message:
NO MORE FREE CAM SPACE for IP
level <level>.
snMplsLspUp
brcdIp.0.1010 mplsLspName,
mplsLspPathName Informational The specified LSP is up. The current active
path for the LSP is the value of
mplsLspPathName.
NOTE: Do not use this trap if you are using
the snTrapTMLogging traps.
Sample trap message:
Name of the notification
received: snMplsLspUp
Foundry-MPLS-MIB:mplsLspName.2
.1 : (mlx8tobottomcer)
Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Foundry-MPLS-MIB:mplsLspPathNa
me.2.1 : () Syntax:
SNMPv2-TC:DisplayString,
Instance IDs: (2 1)
Trap name and number Varbinds Severity Description and trap message