Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 422)

394 Unified IP MIB Reference
53-1002549-02
IPv4 ACL table
snAgAclIcmpCode
brcdIp.1.2.2.15.2.1.30
Syntax: Integer Read write If you entered a value for ICMP message type number in
the
“snAgAclSourceOperand2” object, enter the code
number in this object.
Valid value for type code 1, Echo reply
1 = Echo reply
Valid values for type code 4, Destination unreachable
•
1 = Network unreachable
•
2 = Host unreachable
•
3 = Protocol unreachable
•
4 = Port unreachable
•
5 = Fragmentation needed but do not fragment bit
set
•
6 = Source route failed
•
7 = Destination network unknown
•
8 = Destination host unknown
•
9 = Source host isolated
•
10 = Destination network administratively prohibited
•
11 = Destination host administratively prohibited
•
12 = Network unreachable for TOS
•
13 = Host unreachable for TOS
•
14 = Communication administratively prohibited by
filter
•
15 = Host precedence violation
•
16 = Precedence cutoff in effect
Valid values for type code 5, Source quench
1 = Source quench
Valid values for type code 6, Redirect
•
1 = Redirect for network
•
2 = Redirect for host
•
3 = Redirect for TOS and network
•
4 = Redirect for TOS and host
Valid value for type code 9, Echo request
1 = Echo request
Valid value for type code 10, Router advertisement
1 = Router advertisement
Valid value for type code 11, Router solicitation
1 = Router solicitation
Valid values for type code 12, Time exceeded
•
1 = Time to live equals 0 during transmit
•
2 = Time to live equals 0 during reassembly
Valid values for type code 13, Parameter problem
•
1 = IP header bad (catchall error)
•
2 = Required option missing
Valid value for type code 14, Timestamp request
1 = Timestamp request
Valid value for type code 15, Timestamp reply
1 = Timestamp reply
Valid value for type code 16, Information request
1 = Information request
Valid value for type code 17, Information reply
1 = Information reply
Name, OID, and syntax Access Description