Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 638)

610 Unified IP MIB Reference
53-1002549-02
Route map set configuration table
brcdRouteMapSetValue
(continued)
•
setExtCommunitySOO(10)—Specifies the site-of-origin VPN
extended community attributes. The VPN community is
formatted as “ASN:nn”.
•
setOutputInterfaces(11)—Identifies the list of output IfIndices.
The value 0 matches to the null0 interface. Each IfIndex is a
32-bit integer in big-endian order. One or more interface
IfIndices can be specified by separating each IfIndex by one or
more spaces. If the ifIndex is not null0, then the preserve
VLAN flag is mandatory and that is always implicitly set.
•
setNextHopIpv4Addr(12)—Identifies the string representation
of the next hop IPv4 address without the preserve VLAN flag.
•
setNextHopIpv4AddrWithPreserveVlan(13)—Identifies the
string representation of the next hop IPv4 address with the
preserve VLAN flag.
•
setNextHopIpv6Addr(14)—Identifies the string representation
of the next hop IPv6 address without the preserve VLAN flag.
•
setNextHopIpv6AddrWithPreserveVlan(15)—Identifies the
string representation of the next hop IPv6 address with the
preserve VLAN flag.
•
setNextHopIpPeerAddr(16)—Specifies the string
representation of a truth value. The object gets deleted when
the value is set to 0 (zero). Identifies the next hop of a BGP
IPv4 peer address.
•
setIsisLevel(17)—Identifies the level to which to import the
IS-IS route. The value is a string representation
of one of the
following decimal values: level1(1), level2(2), or level1or2(3).
•
setLocalPreference(18)—Identifies the BGP local preference
path attribute value to be set. The value is a string
representation of the decimal preference value.
•
setMetricType(19)—Specifies the route metric type for the
destination routing protocol. The value is a string
representation of one of the following values: internal(1),
external(2), type1(3), or type2(4).
•
setMetric(20)—Specifies the metric value set for the
destination routing protocol. The value is a string
representation of the following values:
-
<n>: Metric value
-
+<n> : Add <n> to metric
-
-<n> : Subtract <n> to metric
-
None : remove metric value
•
setNextHopFloodVlan(21)—Specifies the next hop VLAN
without the preserve VLAN to be set. The value is a string
representation of the VLAN ID (1 through 4090).
•
setNextHopFloodVlanPreserveVlan(22)—Specifies the next
hop VLAN with the preserve VLAN to be set. The value is a
string representation of the VLAN ID (1 through 4090).
•
setNextHopFloodVlanOutgoingDa(23)—Specifies the next hop
VLAN with the outgoing destination address flag set. The value
is a string representation of the VLAN ID (1 through 4090)
followed with a MAC address.
Name, OID, and syntax Access Description