Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 442)

414 Unified IP MIB Reference
53-1002549-02
VRRP virtual router table
snVrrpVirRtrTrackVifMask
brcdIp.1.2.12.3.1.1.14
Syntax: OCTET STRING Read-write This object was obsoleted and replaced by
“snVrrpVirRtrTrackVifPortList” .
It specifies the identity of the virtual interface whose state is to be
monitored. Each bit represents a port on a device.
Valid values:
•
Chassis devices can have up to 32 octets.
•
Stackable devices can have up to 4 octets.
Default: 0 octets
If this object is configured on an interface, then the preference level
for the interface will be adjusted dynamically, depending on the state
of the track port:
•
When the track port states first changes from up to down, the
interface’s preference level is reduced by the value of the
preference level parameter.
•
The next time the track port state changes from down to up, the
interface’s preference level is increased by the amount specified
by the preference level.
snVrrpVirRtrRowStatus
brcdIp.1.2.12.3.1.1.15
Syntax: Integer Read-write Controls the management of the table rows. The following values can
be written:
•
delete(3) – Delete the row.
•
create(4) – Create a new row.
•
modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
snVrrpVirRtrRxArpPktDropCn
ts
brcdIp.1.2.12.3.1.1.16
Syntax: Counter32 Read-only Shows the number of ARP packets addressed to the interface that
were dropped.
snVrrpVirRtrRxIpPktDropCnt
s
brcdIp.1.2.12.3.1.1.17
Syntax: Counter32 Read-only Shows the number of IP packets addressed to the interface that were
dropped.
snVrrpVirRtrRxPortMismatch
Cnts
brcdIp.1.2.12.3.1.1.18
Syntax: Counter32 Read-only Shows the number of packets received that did not match the
configuration for the receiving interface.
snVrrpVirRtrRxNumOfIpMis
matchCnts
brcdIp.1.2.12.3.1.1.19
Syntax: Counter32 Read-only Shows the number of packets received that did not match the
configured IP addresses.
snVrrpVirRtrRxIpMismatchC
nts
brcdIp.1.2.12.3.1.1.20
Syntax: Counter32 Read-only Shows the number of receive VRRP IP addresses that did not match
the configured VRRP addresses.
Name, OID, and syntax Access Description