Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 403)

Unified IP MIB Reference 375
53-1002549-02
TM VOQ statistics table
TM VOQ statistics table
The brcdTMDestUcastQStatTable contains information of the unicast queue counters aggregated
across all the Traffic Managers (TMs) per destination interface. The following MIB objects are
supported on the Brocade NetIron XMR and Brocade MLX Series devices and the table is not
supported on the Brocade NetIron CES and Brocade NetIron CER series devices.
By default, the SNMP support for brcdTMDestUcastQStatTable is disabled. Use tm-voq-collection
[interval <seconds>] command to enable Traffic Manager (TM) Virtual Output Queue (VOQ)
statistics and snmp-server enable mib tm-dest-qstat command to enable the SNMP support.
Use clear tm-voq-stats dst_port [ ethernet | all ] <slot/port> command to clear all the CLI and
SNMP statistics counters for the TM VOQ statistics.
brcdTMStatsIngressDequeueBytes
brcdIp.1.14.2.2.2.1.10
Syntax: Counter64 Read-only Shows the count of all bytes dequeued from ingress
queues and forwarded to the TM.
NOTE: This object is not supported on the
NI-MLX-10Gx8-D 8-port 10GbE (D) module,
NI-MLX-10Gx8-M 8-port 10GbE (M) module,
and BR-MLX-100Gx2 cards. Zero is returned for
these cards.
brcdTMStatsIngressTotalQDiscardPkts
brcdIp.1.14.2.2.2.1.11
Syntax: Counter64 Read-only Shows the count of all packets failing to enter ingress
queues on the TM. This may be due to the following
reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMStatsIngressTotalQDiscardBytes
brcdIp.1.14.2.2.2.1.12
Syntax: Counter64 Read-only Shows the count of all bytes failing to enter ingress
queues on the TM. This may be due to the following
reasons:
•
The queue reaches its maximum depth, WRED, or
other reasons.
•
The Network Processor drops the packets due to
an unknown Layer 3 route, RPF, or segment
filtering.
brcdTMStatsIngressOldestDiscardPkts
brcdIp.1.14.2.2.2.1.13
Syntax: Counter64 Read-only Shows the count of all packets entering ingress
queues on the TM, but deleted later due to the buffer
being full.
brcdTMStatsIngressOldestDiscardBytes
brcdIp.1.14.2.2.2.1.14
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues
on the TM, but deleted later due to the buffer being
full.
brcdTMStatsEgressDiscardPkts
brcdIp.1.14.2.2.2.1.15
Syntax: Counter64 Read-only Shows the count of all packets failing to enter egress
queues on the TM.
brcdTMStatsEgressDiscardBytes
brcdIp.1.14.2.2.2.1.16
Syntax: Counter64 Read-only Shows the count of all bytes failing to enter egress
queues on the TM.
Name, OID, and syntax Access Description