Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 309)

Unified IP MIB Reference 281
53-1002549-02
Chapter
21
System Logging Group
In this chapter
• Global system logging group objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281
• Dynamic system logging buffer table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283
• Static system logging buffer table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
• System log server table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285
• IPv4/IPv6 sysLog server table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Global system logging group objects
The following objects are for global system logging processes for all devices.
Name, OID, and syntax Access Description
snAgSysLogGblEnable
brcdIp.1.1.2.6.1.1
Syntax: Integer Read-write Enables or disables system logging. Set this object to one of the
following values:
•
disable(0)
•
enable(1)
Default: enable(1)
snAgSysLogGblBufferSize
brcdIp.1.1.2.6.1.2
Syntax: Integer32 Read-write Sets the number of dynamic system logging entries.
Valid values: Up to 100 entries
Default: 50 entries
snAgSysLogGblClear
brcdIp.1.1.2.6.1.3
Syntax: Integer Read-write Clears the dynamic and static system log buffers. Set this object to
one of the following values:
•
normal(0) – System logs will not be cleared.
•
clearAll(1) – Clears both dynamic and static system log
buffers.
•
clearDynamic(2) – Clears only the dynamic system log.
•
clearStatic(3) – Clears only the static system log.