Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 275)

Unified IP MIB Reference 247
53-1002549-02
IP community list string table
snIpCommunityListStringSequen
ce
brcdIp.1.2.2.17.1.2
Syntax: Integer32 Read-only Indicates the sequence of this entry in the table.
snIpCommunityListStringAction
brcdIp.1.2.2.17.1.3
Syntax: Integer Read-write Indicates the action to take if the community string on the
packet matches this filter:
•
deny(0)
•
permit(1)
snIpCommunityListStringCommN
um
brcdIp.1.2.2.17.1.4
Syntax: Integer Read-write Shows the community string’s number, represented by four
octets. This number can be from 1 to 0xFFFFFFFF.
There can be up to 20 community string numbers.
snIpCommunityListStringInternet
brcdIp.1.2.2.17.1.5
Syntax: Integer Read-write Indicates if the community is enabled:
•
disabled(0)
•
enabled(1)
snIpCommunityListStringNoAdver
tise
brcdIp.1.2.2.17.1.6
Syntax: Integer Read-write Indicates the community string will not be advertised to any
internal or external peers:
•
false(0)
•
true(1)
snIpCommunityListStringNoExpor
t
brcdIp.1.2.2.17.1.7
Syntax: Integer Read-write Indicates if this route is not advertised as an EBGP peer:
•
false(0)
•
true(1)
snIpCommunityListStringRowStat
us
brcdIp.1.2.2.17.1.8
Syntax: Integer Read-write Controls the management of the table rows. The values that
can be written are:
•
delete(3) – Delete the row
•
create(4) – Create a new row
•
modify(5) – Modify an existing row
If the row exists, then a SET with a value of create(4) returns a
"bad value" error. Deleted rows are removed from the table
immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row
•
invalid(1) – Row is inoperative
•
valid(2) – Row exists and is valid
snIpCommunityListStringLocalAs
brcdIp.1.2.2.17.1.9
Syntax: Integer Read-write Determines if this route will be sent to peers in other sub
autonomous systems within the local confederation. Do not
advertise this route to an external system.
snIpCommunityListStringType
brcdIp.1.2.2.17.1.10
Syntax: Integer Read-write Displays the type of the community list, whether standard or
extended.
snIpCommunityListStringRegExpr
brcdIp.1.2.2.17.1.11
Syntax: DisplayString Read-write This will display the regular expression string for extended
community list.
This object returns the value NULL for standard community list.
Name, OID, and Syntax Access Description