Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 645)

Unified IP MIB Reference 617
53-1002549-02
BFD session performance table
BFD session performance table
This table specifies the performance counters for BFD sessions.
bfdSessAddr
brcdIp.3.3.1.1.2.1.14
Syntax: InetAddress Read-only The IP address of the interface associated with this BFD session.
Also used to enable BFD on a specific interface.
The value is set to zero when the BFD session is not associated
with a specific interface.
bfdSessDesiredMinTxInterval
brcdIp.3.3.1.1.2.1.15
Syntax: Unsigned32 Read-only Specifies the minimum interval, in microseconds, that the local
system would like to use when transmitting BFD Control packets.
bfdSessReqMinRxInterval
brcdIp.3.3.1.1.2.1.16
Syntax: Unsigned32 Read-only Specifies the minimum interval, in microseconds, between
received BFD Control packets the local system is capable of
supporting.
bfdSessReqMinEchoRxInterv
al
brcdIp.3.3.1.1.2.1.17
Syntax: BfdInterval Read-only Specifies the minimum interval, in microseconds, between
received BFD Echo packets that this system is capable of
supporting.
bfdSessDetectMult
brcdIp.3.3.1.1.2.1.18
Syntax: Unsigned32 Read-only Specifies the Detect time multiplier.
bfdSessStorType
brcdIp.3.3.1.1.2.1.19
Syntax: StorageType Read-only Indicates the storage type for this object. Conceptual rows having
the value "permanent" need not allow write-access to any
columnar objects in the row.
bfdSessRowStatus
brcdIp.3.3.1.1.2.1.20
Syntax: RowStatus Read-only Creates, modifies, or deletes a row in this table. When a row in
this table has a row in the active(1) state, no objects in this row
can be modified except bfdSessRowStatus and
bfdSessStorageType.
bfdSessAuthPressFlag
brcdIp.3.3.1.1.2.1.21
Syntax: TruthValue Read-only Indicates if the device wants the BFD sessions to be
authenticated:
•
true(1) - BFD sessions will be authenticated.
•
false(0) - BFD sessions will not be authenticated.
bfdSessAuthenticationType
brcdIp.3.3.1.1.2.1.22
Syntax: Integer Read-only Indicates the authentication type used for this BFD session, if
BFD sessions are authenticated:
•
simplePassword(1)
•
keyedMD5(2)
•
meticulousKeyedMD5(3)
•
keyedSHA1(4)
•
meticulousKeyedSHA1(5)
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
bfdSessPerfTable
brcdIp.3.3.1.1.3 None The BFD session performance table.
bfdSessPerfPktIn
brcdIp.3.3.1.1.3.1.1
Syntax: Counter32 Read-only The total number of BFD messages received for this BFD session.