Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 213)

Unified IP MIB Reference 185
53-1002549-02
Switch group configuration
snPortStpSetAll
brcdIp.1.1.3.1.11
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write The value of this object is 1, which means that Port STP Set-all
command is invoked. The snPortStpPriority and snPortStpPathCost
which are the read-write STP-related attributes of the first row of the
table, will be used to set the same attributes for all the ports in the
system.
NOTE: Before setting this object, all the intended attributes of the
given row of the table must be set. Otherwise, the current data
of the row will be used to set the entire port table. The
previous setting will be overwritten by the new one.
snSwProbePortNum
brcdIp.1.1.3.1.12
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write Indicates which chassis port is assigned as the chassis switch probe
port. That port operates as a traffic analyzer port. Only one port in the
chassis or stackable switch can be assigned as the traffic analyzer
port. The value of this object represents the following:
•
Bit 0 to bit 7 – Port number
•
Bit 8 to bit 11 – Slot number
snSw8021qTagMode
brcdIp.1.1.3.1.13
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write Indicates if IEEE802.1q has been enabled for the switch group:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
snSwGlobalStpMode
brcdIp.1.1.3.1.14
Syntax: Integer
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-write Indicates whether or not Spanning Tree System Global Mode has been
enabled for the switch group:
•
disabled(0)
•
enabled(1)
Name, OID, and syntax Access Description