Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 709)

Unified IP MIB Reference 681
53-1002549-02
Proprietary traps
Proprietary traps
This section presents the proprietary traps supported on devices running proprietary software.
mplsL3VpnNumVrfRouteMax
ThreshCleared
1.3.6.1.2.1.10.166.11.0.6 No mplsL3VpnVrfPerfCurrN
umRoutes,
mplsL3VpnVrfConfHigh
RteThresh This notification is generated only
after the number of routes contained
by the specified VRF exceeds or
attempts to exceed the maximum
allowed value as indicated by
mplsVrfMaxRouteThreshold, and then
falls below this value. The notification
informs the operator that the error
condition has been cleared without
the operator having to query the
device.
Note that the
mplsL3VpnVrfConfRteMxThrshTime
object denotes the interval at which
the
mplsNumVrfRouteMaxThreshExceede
d notification will be reissued after the
maximum value has been exceeded
(or reached if
mplsL3VpnVrfConfMaxRoutes and
mplsL3VpnVrfConfHighRteThresh are
equal) and the initial notification has
been issued. Thus, the generation of
this notification should also be
emitted with this same frequency
(assuming that the error condition is
cleared). Specifically, if the error
condition is reached and cleared
several times during the period of time
specified in
mplsL3VpnVrfConfRteMxThrshTime,
only a single notification is issued to
indicate the first instance of the error
condition as well as the first time the
error condition is cleared. This
behavior is intended to prevent
continuous generation of notifications
by an agent in the event that routes.
This notification is generated only
after the number of routes contained
by the specified VRF exceeds or
attempts to exceed the maximum
allowed value as indicated by
mplsVrfMaxRouteThreshold, and then
falls below this value. The default
value is 0. If this value is set to 0, the
agent should issue a notification
whenever the maximum threshold has
been cleared.
Trap name Supported? Varbind Description