Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 333)

Unified IP MIB Reference 305
53-1002549-02
VLAN by IPX network configuration table
VLAN by IPX network configuration table
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
The following table applies to protocol VLANs that use the IPX routing protocol. Unless otherwise
stated in the object description, all objects in this table apply to all devices.
snVLanByIpSubnetChassisStatic
Mask
brcdIp.1.1.3.2.3.1.10
Syntax: Octet string Read-write This object has 32 octets. It is replaced by the
“snVLanByIpSubnetStaticPortList” object. It shows the chassis
VLAN by Subnet port membership applied in static mode.
snVLanByIpSubnetChassisExclu
deMask
brcdIp.1.1.3.2.3.1.11
Syntax: Octet string Read-write This object has 32 octets. It is replaced by the
“snVLanByIpSubnetExcludePortList” object. It shows the chassis
VLAN by Subnet port membership applied in exclusive mode.
snVLanByIpSubnetChassisDyna
micMask
brcdIp.1.1.3.2.3.1.12
Syntax: Octet string Read-write This object has 32 octets .It is replaced by the
“snVLanByIpSubnetDynamicPortList” object. It shows the
chassis VLAN by Subnet port membership applied in exclusive
mode.
snVLanByIpSubnetVLanName
brcdIp.1.1.3.2.3.1.13
Syntax: Display string Read-write Shows the name of the community string that is allowed to
access the VLAN.
Valid values: Up to 32 characters
snVLanByIpSubnetStaticPortList
brcdIp.1.1.3.2.3.1.14
Syntax: Octet string Read-write This object is an index of ports that are configured to be
members of the VLAN by IP Subnet. Each port index is a 16-bit
integer in big-endian order. The first 8 bits are the slot number;
the other 8 bits are the port number.
snVLanByIpSubnetExcludePortLi
st
brcdIp.1.1.3.2.3.1.15
Syntax: Octet string Read-write This object is an index of ports that are excluded from port
membership of the VLAN by IP Subnet. Each port index is a
16-bit integer in big-endian order. The first 8 bits are the slot
number; the other 8 bits are the port number.
snVLanByIpSubnetDynamicPortL
ist
brcdIp.1.1.3.2.3.1.16
Syntax: Octet string Read-only This object is an index of ports that can dynamically join the port
membership of the VLAN by IP Subnet. Each port index is a
16-bit integer in big-endian order. The first 8 bits are the slot
number; the other 8 bits are the port number.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snVLanByIpxNetTable
brcdIp.1.1.3.2.4 None The VLAN by IPX network number table.
snVLanByIpxNetVLanId
brcdIp.1.1.3.2.4.1.1
Syntax: Integer Read-only The VLAN ID index to both the VLAN by port information table and
this table.
Valid values: 1 – 4095
snVLanByIpxNetNetworkNum
brcdIp.1.1.3.2.4.1.2
Syntax: OCTET STRING Read-only Shows the IPX Network Number. This object has four octets.