Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 639)

Unified IP MIB Reference 611
53-1002549-02
Route map bind table
Route map bind table
The following table contains MIB objects of the route map bind entries.
brcdRouteMapSetValue
(continued)
•
setNextHopIpTunnel(24)—Specifies the next hop IP tunnel that
is configured for configured GRE tunnels. The value is a string
representation of the decimal tunnel ID.
•
setNextHopLsp(25)—Specifies the next hop LSP name.
•
setBgpOrigin(26)—Specifies the BGP origin code. The value is
a string representation of the igp(1) and incomplete(2)
decimal values.
•
setTag(27)—Specifies the string representation of the decimal
tag value for the destination routing protocol.
•
setWeight(28)—Specifies the string representation of the
decimal value for BGP weight for the routing table.
brcdRouteMapSetCliString
brcdIp.1.1.3.39.1.1.3.1.4
Syntax: DisplayString Read-only Represents an equivalent CLI route map set command for a pair of
brcdRouteMapSetType and brcdRouteMapSetValue objects.
brcdRouteMapSetRowStatu
s
brcdIp.1.1.3.39.1.1.3.1.5
Syntax: RowStatus Read-create The following options are supported:
•
active(1)—To return GET and GET-NEXT requests.
•
createAndGo(4)—To add a new row.
•
destroy(6)—To remove a row.
The other values in the enumeration are not supported.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
brcdRouteMapBindTable
brcdIp.1.1.3.39.1.1.4 None The table contains the bindings for the route map entries to the
interfaces.
Only one route map can be bound to a given interface. Attempting
to bind a second route map to the same interface returns an error.
brcdRouteMapBindIfIndex
brcdIp.1.1.3.39.1.1.4.1.1
Syntax: InterfaceIndex None Identifies an interface to bind a route map. The interface can only
be a physical or virtual type.
brcdRouteMapBindIpType
brcdIp.1.1.3.39.1.1.4.1.2
Syntax: InetAddressType None Identifies an IP type for the bind. The route map can be bound only
to an IPv4 or IPv6 policy.
brcdRouteMapBindMapNa
me
brcdIp.1.1.3.39.1.1.4.1.3
Syntax: DisplayString Read-create Identifies the route map name. A maximum of 80 characters is
allowed on the Brocade NetIron devices.
brcdRouteMapBindRowStat
us
brcdIp.1.1.3.39.1.1.4.1.4
Syntax: RowStatus Read-create The following options are supported:
•
active(1)—To return GET and GET-NEXT requests.
•
createAndGo(4)—To add a new row.
•
destroy(6)—To remove a row.
The other values in the enumeration are not supported.