Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 747)

Unified IP MIB Reference 719
53-1002549-02
Examples
NOTE
The following table is not supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
Examples
The following is an example of how to generate an SNMP trap for a RMON event.
RMON event traps
Perform the following stetps if you want to configure a device to send an SNMP trap when CPU
utilization exceeds 50 percent.
Trap name and number Access Description
fdryTrapReceiverTable
brcdIp.1.1.10.1.1.1 None The trap receiver table.
fdryTrapReceiverIndex
brcdIp.1.1.10.1.1.1.1.1
Syntax: Unsigned32 None The index to the trap receiver table.
fdryTrapReceiverAddrType
brcdIp.1.1.10.1.1.1.1.2
Syntax: InetAddressType Read-create The IP address type:
•
ipv4(1)
•
ipv6(2)
Default: ipv4(1)
fdryTrapReceiverAddr
brcdIp.1.1.10.1.1.1.1.3
Syntax: InetAddress Read-create The IP address of the SNMP manager that will receive the trap.
fdryTrapReceiverCommunityOrS
ecurityName
brcdIp.1.1.10.1.1.1.1.4
Syntax: OCTET STRING Read-create The community string to use to access the trap receiver. This
object can have up to 32 octets. In the case of the USM
(SNMPv3) security model, this object is used to provide the
security name.
fdryTrapReceiverUDPPort
brcdIp.1.1.10.1.1.1.1.5
Syntax: Integer32 Read-create The UPD port number of the trap receiver.
Valid value: 0 – 65535
Default: 162
fdryTrapReceiverSecurityModel
brcdIp.1.1.10.1.1.1.1.6
Syntax: SecurityModel Read-create The version of trap format to be used.
Default: v1
fdryTrapReceiverSecurityLevel
brcdIp.1.1.10.1.1.1.1.7
Syntax: SecurityLevel Read-create Used for the USM (SNMPv3) security model to specify the level of
security. The security name is provided by
fdryTrapReceiverCommunityOrSecurityName.
Default: noAuth
fdryTrapReceiverRowStatus
brcdIp.1.1.10.1.1.1.1.8
Syntax: RowStatus Read-create This variable is used to create, modify, or delete a row in this
table. When a row in this table is in active(1) state, no objects in
that row can be modified except this object.