Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 650)

622 Unified IP MIB Reference
53-1002549-02
AppleTalk general group
snRtATArpRetransmitCo
unt
brcdIp.1.2.10.1.6
Syntax: Integer Read-write Indicates the maximum number of times that a packet will be sent out
for ARP cache informational updates. The packet is sent out until the
information is received or the maximum amount defined has been
reached.
Valid values: 1 – 10
Default: 2
snRtATArpRetransmitInt
erval
brcdIp.1.2.10.1.7
Syntax: Integer Read-write The number of seconds the device waits for an AppleTalk ARP response
before sending out the next ARP packet.
Valid values: 1 – 120 seconds
Default: 1 second
snRtATGleanPacketsEna
ble
brcdIp.1.2.10.1.8
Syntax: Integer Read-write Indicates if the AppleTalk glean packets function is enabled on this
device:
•
disabled(0)
•
enabled(1)
If enabled, the device tries to learn the MAC address from the packet
instead of sending out an ARP request.
Default: disabled(0)
snRtATRtmpUpdateInter
val
brcdIp.1.2.10.1.9
Syntax: Integer Read-write Indicates how often the device sends RTMP updates on AppleTalk
interfaces.
Valid values: 1 – 3600 seconds.
Default: 10 seconds.
snRtATZipQueryInterval
brcdIp.1.2.10.1.10
Syntax: Integer Read-write Indicates how often the device transmits a ZIP query.
Valid values: 1 – 1000 seconds
Default: 10 seconds
snRtATInRtmpPkts
brcdIp.1.2.10.1.11
Syntax: Counter Read-only Shows the total number of RTMP packets received by this device.
snRtATOutRtmpPkts
brcdIp.1.2.10.1.12
Syntax: Counter Read-only Shows the total number of RTMP packets that were transmitted by this
device.
snRtATFilteredRtmpPkts
brcdIp.1.2.10.1.13
Syntax: Counter Read-only Shows the total number of RTMP packets that were filtered by this
device.
snRtATInZipPkts
brcdIp.1.2.10.1.14
Syntax: Counter Read-only Shows the total number of ZIP packets that were received by this device.
snRtATOutZipPkts
brcdIp.1.2.10.1.15
Syntax: Counter Read-only Shows the total number of ZIP packets that were transmitted by this
device.
snRtATInZipGZLPkts
brcdIp.1.2.10.1.16
Syntax: Counter Read-only Shows the total number of ZIP get zone list packets that where received
by this device.
snRtATOutZipGZLPkts
brcdIp.1.2.10.1.17
Syntax: Counter Read-only Shows the total number of ZIP get zone list packets that were
transmitted by this device.
snRtATInZipNetInfoPkts
brcdIp.1.2.10.1.18
Syntax: Counter Read-only Shows the total number of ZIP network information packets that were
received by this device.
Name, OID, and syntax Access Description