Sntrapl2caccesslog, Sntrapdot1agcfmremote mepup, Sntrapdot1agcfmdomain crossconnection – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 749: Sntrapdot1agcfmduplicat emepid, Sntrapchasfanok

Advertising
background image

Unified IP MIB Reference

721

53-1002549-02

General traps for the Brocade NetIron devices

snTrapl2CAccessLog
brcdIp.0.184

snAgGblTrapMessage

Notification

This trap is generated to provide information
about the state of the I2C access of the
management module.
Sample trap message:
last good i2c access, Mux index

0, Mux tap 0, ID 0x9, Addr 0x1,

(SNM2TEMP)

bad i2c access (GIEI = set),

Severity Minor, Mux index 0,

Mux tap2, ID 0x9, Addr 0x1,

(SNM3TEMP)

snTrapDot1agCfmRemote
MEPAgeOut
brcdIp.0.192

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage

Warning

This trap is generated when the 802.1ag
Remote MEP ages out.
Sample trap message:
System: Remote MEP 2 in Domain

maint_domain, MA maint_asso

aged out

snTrapDot1agCfmRemote
MEPUp
brcdIp.0.193

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage

Informational This trap is generated when the 802.1ag

Remote MEP is up.
Sample trap message:
System: Remote MEP 2 in Domain

maint_domain, MA maint_asso

become UP state

snTrapDot1agCfmDomain
CrossConnection
brcdIp.0.194.

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
snAgGblTrapMessage

Warning

This trap is generated when the 802.1ag
domain gets cross-connected.
Sample trap message:
System: Cross Connection in

Domain MLX4maintDomain, MA

MLX4maintAsso

snTrapDot1agCfmDuplicat
eMEPId
brcdIp.0.195

dot1agCfmMdName,
dot1agCfmMaNetNa
me,
dot1agCfmMepDbRM
epState,
snAgGblTrapMessage

Warning

This trap is generated when the 802.1ag
Remote MEP reports a duplicate MEP ID
that conflicts with a local MEP ID.
Sample trap message:
System: Remote MEP ID 1 in

Domain MLX4maintDomain, MA

MLX4maintAsso is same as ours

snTrapChasFanOK
brcdIp.0.1000

snChasFanIndex,
snChasFanDescriptio
n

Minor

One of the following occurred on the device:

The status of the fan operation
changed from failure to normal.

Fan speed changed due to a decrease
in the operating temperature.

Sample trap message:
Right fan tray (fan1) OK

Trap name and number

Varbinds

Severity

Description and trap message

Advertising