Snvrrpclearvrrpstat, Snvrrpgroupopermodevrrpexte nded, Vrrp interface table – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 438: Snvrrpiftable, Snvrrpifport, Snvrrpifauthtype, Snvrrpifauthpassword, Snvrrpifrxheadererrcnt s, Snvrrpifrxauthtypeerrc nts
410
Unified IP MIB Reference
53-1002549-02
VRRP interface table
VRRP interface table
The objects in the following table apply to VRRP, VRRP-E, and VSRP, depending on which protocol is
enabled in the device. This table has been replaced by the
table, which is
presented in
“VRRP and VRRP-E interface table”
.
snVrrpClearVrrpStat
brcdIp.1.2.12.1.5
Syntax: Integer
Read-write
Clear VRRP statistics command.
snVrrpGroupOperModeVrrpexte
nded
brcdIp.1.2.12.1.6
Syntax: Integer
NOTE: This object is supported
on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES,
and Brocade NetIron
CER series devices.
Read-write
Indicates if VRRP-E is enabled on this device:
•
disabled(0)
•
enabled(1)
Default: disabled(0)
Name, OID, and syntax
Access
Description
Name, OID, and syntax
Access
Description
snVrrpIfTable
brcdIp.1.2.12.2.1
None
The VRRP interface table.
snVrrpIfPort
brcdIp.1.2.12.2.1.1.1
Syntax: Integer
Read-only
Shows the IP port of this VRRP interface.
snVrrpIfAuthType
brcdIp.1.2.12.2.1.1.2
Syntax: Integer
Read-write
Indicates the authentication type of this interface:
•
noAuth(0)
•
simpleTextPasswd(1)
•
ipAuthHeader(2)
snVrrpIfAuthPassword
brcdIp.1.2.12.2.1.1.3
Syntax: OCTET STRING
Read-write
Shows the simple text password for this interface. You can use a simple
text password if the
object is set to
simpleTextPasswd(1).
snVrrpIfRxHeaderErrCnt
s
brcdIp.1.2.12.2.1.1.4
Syntax: Counter32
Read-only
Shows the number of VRRP or VRRP-E packets received by the interface
that had a header error.
snVrrpIfRxAuthTypeErrC
nts
brcdIp.1.2.12.2.1.1.5
Syntax: Counter32
Read-only
Shows the number of VRRP or VRRP-E packets received by the interface
that had an authentication error.