Sntrapportsecurityviolation, Sntrapportsecurityshutdown, Mrp traps – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 734: Sntrapmrpstatechange, Sntrapmrpcamerror, Mpls notifications, Fdryvplscreated

Advertising
background image

706

Unified IP MIB Reference

53-1002549-02

Proprietary traps

MRP traps

The following traps are generated for MRP functionalities.

MPLS notifications

NOTE

The following MPLS traps are included in the Unified IP MIB but they are not supported:

snTrapMplsProblem (brcdIp.0.57)
snTrapMplsException (brcdIp.0.58)
snTrapMplsAudit (brcdIp.0.59)
snTrapMplsDeveloper (brcdIp.0.60)

The following traps are supported only on the Brocade NetIron MLX, Brocade MLXe, Brocade
NetIron XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.

Trap name and number

Varbinds

Severity

Description and trap message

snTrapPortSecurityViolation
brcdIp.0.77

snAgGblTrapMessage Minor

Packets from an unknown MAC address
are dropped.
Sample trap message:
Brocade Trap: Port Security

Violation

snTrapPortSecurityShutdown
brcdIp.0.78

snAgGblTrapMessage Minor

The port is disabled for the amount of
time configured using the violation
shutdown <minutes> port security CLI
command.
Sample trap message:
Brocade Trap: Port Security

Violation Cause Shutdown

Trap name and number

Varbinds

Severity

Description

snTrapMrpStateChange
brcdIp.0.79

snAgGblTrapMessage

Informational An MRP state occurred.

snTrapMrpCamError
brcdIp.0.80

snAgGblTrapMessage

Warning

An MRP CAM error occurred.

Trap name and number

Varbinds

Severity

Description

fdryVplsCreated
brcdIp.1.2.15.2.0.1

vplsConfigName
fdryVplsVcId

Informational

Generated when an entry is created in the
fdryVplsTable.
It is not generated during system bootup time.

Advertising