Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 394)

366 Unified IP MIB Reference
53-1002549-02
DHCP Snooping binding database table
DHCP Snooping binding database table
The following table displays DHCP Snooping entries.
Name, OID, and syntax Access Description
fdryDhcpSnoopIfConfigTab
le
brcdIp.1.1.3.36.3.1 None This table allows you to configure the trust state for DHCP Snooping at
each physical interface.
fdryDhcpSnoopIfTrustValu
e
brcdIp.1.1.3.36.3.1.1.1
Syntax: TruthValue Read-write DHCP packets received on this interface will be subjected to DHCP
checks. This object indicates whether the interface is trusted for
DHCP Snooping. If this object is set to “true”, the interface is trusted.
DHCP packets coming to this interface will be forwarded without
checking. If this object is set to “false”, the interface is not trusted.
Name, OID, and syntax Access Description
fdryDhcpSnoopBindTable
brcdIp.1.1.3.36.4.1 None This table provides the information about the DHCP Snooping binding
database learned by the device.
fdryDhcpSnoopBindIpAddr
brcdIp.1.1.3.36.4.1.1.1
Syntax: IpAddress None The device IP address.
fdryDhcpSnoopBindMacA
ddr
brcdIp.1.1.3.36.4.1.1.2
Syntax: MacAddress Read-only The device MAC address.
fdryDhcpSnoopBindType
brcdIp.1.1.3.36.4.1.1.3
Syntax: ArpType Read-only The type of the ARP entry:
•
other(1)
•
static(2)
•
dynamic(3)
•
inspect(4)
•
dhcp(5)
•
dynamicDhcp(6)
•
staticDhcp(7)
•
host(8)
fdryDhcpSnoopBindState
brcdIp.1.1.3.36.4.1.1.4
Syntax: ArpState Read-only The state of the ARP entry:
•
other(1)
•
valid(2)
•
pending(3)
fdryDhcpSnoopBindPort
brcdIp.1.1.3.36.4.1.1.5
Syntax: DisplayString Read-only The port of the ARP entry.
fdryDhcpSnoopBindVlanId
brcdIp.1.1.3.36.4.1.1.6
Syntax: VlanIndex Read-only This object indicates the VLAN number on which DHCP Snooping is
configured.
fdryDhcpSnoopBindClearO
per
brcdIp.1.1.3.36.4.1.1.7
Syntax: ClearAction Read-write This object allows you to clear the entry from the DHCP binding
database:
•
valid(0) - Always returned when the variable is read.
•
clear(1) - Clears this entry in the DHCP binding database.