Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 637)

Unified IP MIB Reference 609
53-1002549-02
Route map set configuration table
brcdRouteMapSetValue
brcdIp.1.1.3.39.1.1.3.1.3
Syntax: DisplayString Read-create Specifies the value corresponding to the brcdRouteMapSetType
object.
The following values are supported:
•
setAsPath(1)—Identifies the prefix string for the BGP AS-Path
attribute. The value is a string representation of the BGP
Autonomous System (AS) number to be appended with the
AS-Path. If the value specified is a string instead of the AS-Path
number, then the value is set as an AS-Path attribute.
•
setAutomaticTag(2)—Specifies that the route map tag is
computed automatically. The value is a string representation
of a truth value 0 or 1. The value 0 is used to mark its deletion.
•
setDeleteCommunityList(3)—Specifies the name of the BGP
community list set for deletion.
•
setCommunityNumber(4)—Specifies the BGP community
number that is added. The format is either “AA:NN” or
<community number>.
•
setCommunityFlag(5)—Specifies that the BGP community
number in the setCommunityNumber value has behaviors
similar to noExport(1), noAdvertise(2), localAs(3), and
additive(4). For additive(4), the number is followed by the
community number in either “AA:NN” or <community number>
format. The value is a string representation of one of the
decimal values.
•
setDampening(6)—Consists of 4 values separated by a space.
-
The first value specifies the string representation of the
decimal value for the BGP route flap dampening. It must
be enabled with half-time in minutes for the penalty. Valid
values range from 1 through 45 minutes. Default value is
15 minutes.
-
The second value relates to the first value and specifies
the string representation of the decimal value to start
reusing a BGP route. Valid values range from 1 through
20000. Default value is 750, with each flap penalty at
1000.
-
The third value relates to the first value and specifies the
string representation of the decimal value to start
suppressing a BGP route. Valid values range from 1
through 20000. Default value is 2000, with each flap
penalty at 1000.
-
The fourth value relates to the first value and specifies
the string representation of maximum duration in
minutes to suppress a stable route. Valid values range
from 1 through 255. The default value is 40 minutes. The
default value is used if a value is not provided.
•
setDistance(7)—Specifies the string representation of admin
distance set for matching OSPF routes.
•
setExtCommunityRT(8)—Specifies one or moreVPN extended
community attributes (separated by a space). Each VPN
community is formatted as “ASN:nn”.
•
setExtCommunityRTAdditive(9)—This value relates to the
setExtCommunityRT value and specifies that the VPN
communities earlier must be added to the existing extended
community.
Name, OID, and syntax Access Description