Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 502)

474 Unified IP MIB Reference
53-1002549-02
BGP4 general variables
snBgp4GenMaxAggregateAddresses
brcdIp.1.2.11.1.20
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 aggregate
addresses.
snBgp4GenMaxAsPathFilters
brcdIp.1.2.11.1.21
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 AS-Path
filters.
snBgp4GenMaxCommunityFilters
brcdIp.1.2.11.1.22
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 community
filters.
snBgp4GenMaxNetworks
brcdIp.1.2.11.1.23
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 networks.
snBgp4GenMaxRouteMapFilters
brcdIp.1.2.11.1.24
Syntax: Integer32
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-only Shows the maximum number of configured BGP4 route map
filters.
Name, OID, and syntax Access Description