Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 425)

Unified IP MIB Reference 397
53-1002549-02
ACL accounting table
Name, OID, and syntax Access Description
agAclAccntTable
brcdIp.1.2.2.15.5 None Table of ACL accounting statistics for router.
agAclAccntKind
brcdIp.1.2.2.15.5.1.1
Syntax: Integer
NOTE: This object is not supported
on the Brocade NetIron CES
and Brocade NetIron CER
series devices.
None The following kinds of ACL accounting statistics are
supported:
•
ipv4(0)
•
l2(1)
•
ipv4PolicyBasedRouting(2)
•
rateLimit(3)
•
receiveAcl(4)
•
ipv6(5)
•
ipv6PolicyBasedRouting(6)
agAclAccntIfIndex
brcdIp.1.2.2.15.5.1.2
Syntax: InterfaceIndex None Physical or virtual interface on which ACL accounting is
desired. For Receive-ACL, use the lowest port of the
management module as the value for this object.
agAclAccntDirection
brcdIp.1.2.2.15.5.1.3
Syntax: Direction None ACL port direction, inbound or outbound. For Receive-ACL
kind, direction cannot be outbound.
agAclAccntAclNumber
brcdIp.1.2.2.15.5.1.4
Syntax: AclNumber None The access list number for this entry.
agAclAccntFilterId
brcdIp.1.2.2.15.5.1.5
Syntax: Unsigned None Filter ID within a given ACL. This is a zero-based value.
agAclAccntAclName
brcdIp.1.2.2.15.5.1.6
Syntax: AclNameString Read-only ACL name for an entry, if applicable. Otherwise, a null
string is returned.
agAclAccntOneSecond
brcdIp.1.2.2.15.5.1.7
Syntax: Counter64 Read-only Accounting data for last one second.
agAclAccntOneMinute
brcdIp.1.2.2.15.5.1.8
Syntax: Counter64 Read-only Accounting data for last one minute.
agAclAccntFiveMinute
brcdIp.1.2.2.15.5.1.9
Syntax: Counter64 Read-only Accounting data for last five minute.
agAclAccntCumulative
brcdIp.1.2.2.15.5.1.10
Syntax: Counter64 Read-only Cumulative accounting data since the ACL was installed.
agAclAccntRaclDropCnt
brcdIp.1.2.2.15.5.1.11
Syntax: Counter64 Read-only Receive-ACL drop counter used for rate limiting. Not used
for other ACL kind. The value returned is per ACL, instead
of per filter within the ACL.
This object supports rate limiting statistics for ACL and
Layer 2 ACL-enabled interfaces.