Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 249)

Unified IP MIB Reference 221
53-1002549-02
CAM usage other table
CAM usage other table
The following table contains information about the CAM usage on the device by traffic other than
Layer 3, Layer 2, and Sessions.
snCamUsageSessionSize
brcdIp.1.14.1.1.2.3.1.4
Syntax: Unsigned32 Read-only Identifies the effective CAM size for this session traffic entry:
•
IPv4 sessions - Each unit is 16 bytes.
•
IPv6 sessions - Each unit is 64 bytes.
snCamUsageSessionFree
brcdIp.1.14.1.1.2.3.1.5
Syntax: Gauge32 Read-only The amount of CAM currently available for this session:
•
IPv4 sessions - Each unit is 16 bytes.
•
IPv6 sessions - Each unit is 64 bytes.
snCamUsageSessionUsedPercent
brcdIp.1.14.1.1.2.3.1.6
Syntax: Percent Read-only The percentage of CAM currently being used by this session.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snCamUsageOtherTable
brcdIp.1.14.1.1.2.4 None CAM usage table for traffic types other than Layer 3, Layer 2,
and Sessions traffic.
snCamUsageOtherSlot
brcdIp.1.14.1.1.2.4.1.1
Syntax: Unsigned32 None A number that uniquely identifies an interface module on the
device.
snCamUsageOtherProcessor
brcdIp.1.14.1.1.2.4.1.2
Syntax: Unsigned32 None A number which uniquely identifies the network processor on
the interface module identified by the
“snCamUsageOtherSlot”
object.
snCamUsageOtherType
brcdIp.1.14.1.1.2.4.1.3
Syntax: Integer None Identifies the traffic type:
•
gre(1)
•
multicastVpls(2)
snCamUsageOtherSize
brcdIp.1.14.1.1.2.4.1.4
Syntax: Unsigned32 Read-only Indicates the effective CAM size for this Other traffic type:
•
GRE - Each unit is 8 bytes.
•
Multicast VPLS - Each unit is 16 bytes.
snCamUsageOtherFree
brcdIp.1.14.1.1.2.4.1.5
Syntax: Gauge32 Read-only Indicates the amount of CAM currently available to this traffic
type:
•
GRE: each unit is 8 bytes
•
Multicast VPLS: each unit is 16 bytes
snCamUsageOtherUsedPercent
brcdIp.1.14.1.1.2.4.1.6
Syntax: Percent Read-only Indicates the percentage of CAM currently being used for this
traffic type.