Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 492)

464 Unified IP MIB Reference
53-1002549-02
IPX IF forward access table
IPX IF forward access table
The following table explains the MIB objects of the IPX interface forward access.
IPX IF RIP access table
The following table explains the MIB objects of the IPX IF RIP access.
Name, OID, and syntax Access Description
snIpxIfFwdAccessTable
brcdIp.1.2.1.8.1 None The IPX Interface (IF) forward access table.
snIpxIfFwdAccessPort
brcdIp.1.2.1.8.1.1.1
Syntax: Integer Read-only The IPX interface to which the forward filter applies.
snIpxIfFwdAccessDir
brcdIp.1.2.1.8.1.1.2
Syntax: Integer Read-only Shows the direction of packets:
•
in(1)
•
out(2)
snIpxIfFwdAccessFilterList
brcdIp.1.2.1.8.1.1.3
Syntax: OCTET STRING Read-write An IPX IF forward filter list. There can be up to 32 octets in this
object.
snIpxIfFwdAccessRowStatus
brcdIp.1.2.1.8.1.1.4
Syntax: Integer Read-write Controls the management of the table rows. The following values
can be written:
•
delete(3) – Delete the row.
•
create(4) – Create a new row.
•
modify(5) – Modify an existing row.
If the row exists, then a SET with a value of create(4) returns a "bad
value" error. Deleted rows are removed from the table immediately.
The following values can be returned on reads:
•
noSuch(0) – No such row.
•
invalid(1) – Row is inoperative.
•
valid(2) – Row exists and is valid.
Name, OID, and syntax Access Description
snIpxIfRipAccessTable
brcdIp.1.2.1.9.1 None The IPX IF RIP access table.
snIpxIfRipAccessPort
brcdIp.1.2.1.9.1.1.1 Read-only The IPX interface to which the RIP filter applies.
snIpxIfRipAccessDir
brcdIp.1.2.1.9.1.1.2 Read-only Shows the direction of the packets:
•
in(1)
•
out(2)