Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 398)

370 Unified IP MIB Reference
53-1002549-02
IP source guard binding table
IP source guard binding table
The following table is used to configure IP source entries.
fdryIpSrcGuardPortVlanVla
nId
brcdIp.1.1.3.37.2.1.1.2
Syntax: VlanIndex None The number of VLANs for IP source guard per port per VLAN.
fdryIpSrcGuardPortVlanEn
able
brcdIp.1.1.3.37.2.1.1.3
Syntax: TruthValue Read-write This object indicates whether IP source guard is enabled at this
interface and this VLAN number. If this object is set to “true”, IP source
guard per port per VLAN is enabled. If this object is set to “false”, IP
source guard per port per VLAN is disabled.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
fdryIpSrcGuardBindTable
brcdIp.1.1.3.37.3.1 None This table provides the IP addresses used for IP source guard on each
physical interface with or without specific VLAN memberships.
fdryIpSrcGuardBindIpAddr
brcdIp.1.1.3.37.3.1.1.1
Syntax: IpAddress None The IP address of the device.
fdryIpSrcGuardBindVlanId
brcdIp.1.1.3.37.3.1.1.2
Syntax: VlanIndex Read-create This object indicates the specific VLAN memberships on this
interface. The VLAN number is optional. If you configure a VLAN
number, the binding applies only to that VLAN. If you do not configure
a VLAN number, the static applies to all VLANs associated with the
port. In this case, the VLAN number will be displayed as “0”.
fdryIpSrcGuardBindRowSt
atus
brcdIp.1.1.3.37.3.1.1.3
Syntax: RowStatus Read-create This variable is used to create or delete a row in this table. When a
row in this table is in active(1) state, no objects in that row can be
modified except this object.
fdryIpSrcGuardBindMode
brcdIp.1.1.3.37.3.1.1.4
Syntax: BindMode Read-only The mode of the IP source guard entry:
•
other(1)
•
active(2)
•
inactive(3)
fdryIpSrcGuardBindType
brcdIp.1.1.3.37.3.1.1.5
Syntax: BindType Read-only The type of the IP source guard entry:
•
other(1)
•
ip(2)