Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 601)

Unified IP MIB Reference 573
53-1002549-02
Authorization and accounting
Authorization and accounting
The following objects are for authorization and accounting functions.
Name, OID, and syntax Access Description
snDosAttackPortTable
brcdIp.1.1.3.14.3.2
Syntax: Sequence of
snDosAttackPortEntry None The denial of service attack port table.
snDosAttackPort
brcdIp.1.1.3.14.3.2.1.1
Syntax: Integer32 Read-only The index value of a port.
snDosAttackPortICMPDropCou
nt
brcdIp.1.1.3.14.3.2.1.2
Syntax: Counter32 Read-only The value of the ICMP drop counter.
snDosAttackPortICMPBlockCo
unt
brcdIp.1.1.3.14.3.2.1.3
Syntax: Counter32 Read-only The value of the ICMP block counter.
snDosAttackPortSYNDropCoun
t
brcdIp.1.1.3.14.3.2.1.4
Syntax: Counter32 Read-only The value of the SYN drop counter.
snDosAttackPortSYNBlockCou
nt
brcdIp.1.1.3.14.3.2.1.5
Syntax: Counter32 Read-only The value of the SYN block counter.
Name, OID, and syntax Access Description
snAuthorizationCommand
Methods
brcdIp.1.1.3.15.2.1
Syntax: OCTET STRING Read-write Specifies the sequence of authorization methods.
This object can have zero to three octets. Each octet represents a
method to authorize the user command. Each octet has the
following value:
•
radius(2) – Authorize by the requesting RADIUS server
•
tacplus(5) – Authorize by the requesting TACACS+ server
•
none(6) – Skip authorization
Setting a zero length octet string invalidates all previous
authorization methods.
snAuthorizationCommandLev
el
brcdIp.1.1.3.15.2.2
Syntax: IpAddress Read-write Specifies the commands that must be authorized. Any command
that is equal to or less than the selected level will be authorized:
•
level(0) – Privilege level 0
•
level(4) – Privilege level 4
•
level(5) – Privilege level 5