Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 663)

Unified IP MIB Reference 635
53-1002549-02
Enabling or disabling Layer 4 traps
Name, OID, and syntax Access Description
snL4EnableMaxSessionLimitR
eachedTrap
brcdIp.1.1.4.1.30
Syntax: Integer Read-write Indicates whether this device has been enabled to generate traps
if the maximum number of connections has been reached:
•
disabled(0)
•
enabled(1)
snL4EnableTcpSynLimitReach
edTrap
brcdIp.1.1.4.1.31
Syntax: Integer Read-write Indicates whether this device has been enabled to generate traps
if the maximum number of TCP SYN request has been reached:
•
disabled(0)
•
enabled(1)
snL4EnableRealServerUpTrap
brcdIp.1.1.4.1.32
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the real server is up:
•
disabled(0)
•
enabled(1)
snL4EnableRealServerDownTr
ap
brcdIp.1.1.4.1.33
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the real server is down:
•
disabled(0)
•
enabled(1)
snL4EnableRealServerPortUpT
rap
brcdIp.1.1.4.1.34
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the real server TCP port is up:
•
disabled(0)
•
enabled(1)
snL4EnableRealServerPortDo
wnTrap
brcdIp.1.1.4.1.35
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the real server TCP port is down:
•
disabled(0)
•
enabled(1)
snL4EnableRealServerMaxCon
nLimitReachedTrap
brcdIp.1.1.4.1.36
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the real server reaches its maximum number of connections:
•
disabled(0)
•
enabled(1)
snL4EnableBecomeStandbyTr
ap
brcdIp.1.1.4.1.37
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the Server Load Balancing switch changes its state from active to
standby:
•
disabled(0)
•
enabled(1)
snL4EnableBecomeActiveTrap
brcdIp.1.1.4.1.38
Syntax: Integer Read-write Indicates if this device has been enabled to generate traps when
the Server Load Balancing switch changes its state from standby to
active:
•
disabled(0)
•
enabled(1)
snL4slbRouterInterfacePortMa
sk
brcdIp.1.1.4.1.39
Syntax: Integer Read-only Shows the router interface port mask.
This object is not used or supported.