Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 214)

186 Unified IP MIB Reference
53-1002549-02
Switch group configuration
snSwIpMcastQuerierMode
brcdIp.1.1.3.1.15
Syntax: Integer Read-write The IP Multicast pruning mode is configured in either Non-Querier or
Querier mode.
•
querier(1) – Send out host queries. (active)
•
nonQuerier(2) – Do not send out host queries. (passive)
Default: querier(1)
snSwViolatorPortNumber
brcdIp.1.1.3.1.17
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only Indicates the port number of the switch or router that receives the
violator packet. This number is included in the locked address
violation trap. The value of this object contains the following:
•
Bit 0 to bit 7 – Port number
•
Bit 8 to bit 11 – Slot number (for chassis devices only)
snSwViolatorMacAddress
brcdIp.1.1.3.1.18
Syntax: MAC address Read-only Indicates the source MAC address of the violator packet received by
the switch or router. This number is included in the locked address
violation trap.
snVLanGroupVlanMaxEntry
brcdIp.1.1.3.1.19
Syntax: Integer32 Read-write Shows the maximum number of VLAN entries that can be configured.
NOTE: This object is read-only on the Brocade NetIron devices. The
SET request returns the error as not writable. Use the
snAgentSysParaConfigEntry object, to set the maximum
allowed VLAN.
snSwEosBufferSize
brcdIp.1.1.3.1.20
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only Specifies buffer size for all the different EOS buffers.
snVLanByPortEntrySize
brcdIp.1.1.3.1.21
Syntax: Integer32
NOTE: This object is not
supported on the
Brocade MLXe
router, Brocade
NetIron MLX,
Brocade NetIron
XMR, Brocade
NetIron CES, and
Brocade NetIron
CER series devices.
Read-only Specifies the size of each VLAN table entry.
Name, OID, and syntax Access Description