Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 402)

374 Unified IP MIB Reference
53-1002549-02
TM statistics table
TM statistics table
The following table contains the TM-related statistics. Use the show tm statistics CLI command to
display information about the TM-related statistics.
This table contains information for the TM statistics on all the POS and the Ethernet
10/100/1000M/10G/100G cards.
Name, OID, and syntax Access Description
brcdTMStatsTable
brcdIp.1.14.2.2.2 None The Traffic Manager statistics table.
brcdTMStatsSlotId
brcdIp.1.14.2.2.2.1.1
Syntax: Unsigned32 None Shows the slot ID of the LP module that uniquely
identifies a line card. The LP module must be
physically present and operationally up.
brcdTMStatsTMDeviceId
brcdIp.1.14.2.2.2.1.2
Syntax: Unsigned32 None Shows the TM device ID that uniquely identifies the
Network Processor TM within a line card in the system.
brcdTMStatsDescription
brcdIp.1.14.2.2.2.1.3
Syntax: DisplayString Read-only Shows the range of ports serviced by
brcdTMStatsTMDeviceId.
brcdTMStatsTotalIngressPktsCnt
brcdIp.1.14.2.2.2.1.4
Syntax: Counter64 Read-only Shows the count of all packets entering into the TM.
brcdTMStatsIngressEnqueuePkts
brcdIp.1.14.2.2.2.1.5
Syntax: Counter64 Read-only Shows the count of all packets entering ingress
queues on the TM.
brcdTMStatsEgressEnqueuePkts
brcdIp.1.14.2.2.2.1.6
Syntax: Counter64 Read-only Shows the count of all packets entering egress queues
and forwarded out of the TM.
brcdTMStatsIngressEnqueueBytes
brcdIp.1.14.2.2.2.1.7
Syntax: Counter64 Read-only Shows the count of all bytes entering ingress queues
on the TM.
NOTE: This object is not supported on the
NI-MLX-10Gx8-D 8-port 10GbE (D) module,
NI-MLX-10Gx8-M 8-port 10GbE (M) module,
and BR-MLX-100Gx2 cards. Zero is returned for
these cards.
brcdTMStatsEgressEnqueueBytes
brcdIp.1.14.2.2.2.1.8
Syntax: Counter64 Read-only Shows the count of all bytes entering egress queues
and forwarded out of the TM.
NOTE: This object is not supported on the
NI-MLX-10Gx8-D 8-port 10GbE (D) module,
NI-MLX-10Gx8-M 8-port 10GbE (M) module,
and BR-MLX-100Gx2 cards. Zero is returned for
these cards.
brcdTMStatsIngressDequeuePkts
brcdIp.1.14.2.2.2.1.9
Syntax: Counter64 Read-only Shows the count of all packets dequeued from ingress
queues and forwarded to the TM.