Wgpnpipdefaultgw, Wgpnpstatus, Wgpnprowstatus – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 700: Vpn passthrough server table, Wgvpnptservertable, Wgvpnptserverpolicyid, Wgvpnptserveripaddress, Wgvpnptserverrowstatus, Vpn passthrough filter table

Advertising
background image

672

Unified IP MIB Reference

53-1002549-02

VPN passthrough server table

VPN passthrough server table

The VPN passthrough server table contains the VPN policies that have been configured on the
WLAN controller.

VPN passthrough filter table

The VPN passthrough filter table shows the VPN passthrough policies and the action the policy
takes when it encounters VPN traffic that matches the policy.

wgPnPIpDefaultGw
brcdIp.1.1.3.23.4.1.5
Syntax: IpAddress

Read-write

Default gateway of the attached AP.

wgPnPStatus
brcdIp.1.1.3.23.4.1.6
Syntax: Integer

Read-only

The state of the access point that is defined for the interface:

other(1)

discovered(2) – The WLAN controller discovered a new access
point that has not been configured.

configured(3) – The access point’s IP address, subnet mask,
and default gateway have been defined on the interface, but
the access point with the matching MAC address is not
attached to the interface.

operational(4) – The access point’s IP address, subnet mask,
and default gateway have been defined on the interface and
the access point with the matching MAC address is attached to
the interface and is operational.

wgPnPRowStatus
brcdIp.1.1.3.23.4.1.7
Syntax: Integer

Read-write

Creates, deletes or modifies a row in the AP ADC table:

other(1)

valid(2)

delete(3)

create(4)

modify(5)

Name, OID, and syntax

Access

Description

Name, OID, and syntax

Access

Description

wgVpnPTServerTable
brcdIp.1.1.3.23.5

None

VPN passthrough server table.

wgVpnPTServerPolicyId
brcdIp.1.1.3.23.5.1.1
Syntax: Integer

Read-only

The ID of a VPN passthrough policy. The value of this object must be
greater than zero.

wgVpnPTServerIpAddress
brcdIp.1.1.3.23.5.1.2
Syntax: IpAddress

Read-only

The IP address of the VPN server that will be used to terminate VPN
traffic that goes through this switch.

wgVpnPTServerRowStatus
brcdIp.1.1.3.23.5.1.3
Syntax: Integer

Read-write

Creates or deletes a row in the VPN passthrough server table:

other(1)

valid(2)

delete(3)

create(4)

Advertising