Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 449)

Unified IP MIB Reference 421
53-1002549-02
Chapter
43
MCT MIB Definition
In this chapter
• MCT global MIB object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
• MCT cluster table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421
• MCT cluster ICL table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424
• MCT cluster peer table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 425
• MCT cluster client table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428
The Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and
Brocade NetIron CER series devices are provided with Simple Network Management Protocol
(SNMP) support for the Multi-Chassis Trunking (MCT) Management Information Base (MIB). MCT
MIB objects provide the support for configuring and retrieving the cluster information on the
Brocade NetIron devices.
NOTE
SNMP SET, GET, and GET-NEXT requests are supported.
MCT global MIB object
The following table lists the global MIB object of the MCT table.
MCT cluster table
The following table lists the objects that apply globally to the Brocade NetIron devices. Currently,
the Brocade NetIron devices support only one cluster.
Use the deploy command or SNMP-SET request for brcdMctClusterDeploy with the deploy(2) value
to verify whether the user has provided all the configuration information. The notReady(3) value for
brcdMctClusterRowStatus indicates the user has not configured all the required cluster objects.
Name, OID, and syntax Access Description
brcdMctL2Forward
brcdIp.1.1.12.1.1.1
Syntax: EnabledStatus Read-write The global cluster Layer 2 forward state of the system. The STP
packets coming from the MCT VLANs is dropped when the object is set
to the disabled(2) state.