Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 524)

496 Unified IP MIB Reference
53-1002549-02
BGP4 route map match table
snBgp4RouteMapSetCommunityNu
m
brcdIp.1.2.11.14.1.1.7
Syntax: Integer Read-write This number is used only if
snBgp4RouteMapSetCommunityCmd was sent together
with the value set to number(0).
snBgp4RouteMapSetCommunityAd
ditive
brcdIp.1.2.11.14.1.1.8
Syntax: Integer Read-write Adds the community to the existing communities.
snBgp4RouteMapSetLocalPreferen
ce
brcdIp.1.2.11.14.1.1.9
Syntax: Integer Read-write Modifies a local preference for BGP routes.
snBgp4RouteMapSetMetric
brcdIp.1.2.11.14.1.1.10
Syntax: Integer32 Read-write Modifies a metric for BGP routes.
snBgp4RouteMapSetNextHop
brcdIp.1.2.11.14.1.1.11
Syntax: IpAddress Read-write Modifies the IP address of the next hop for BGP routes.
snBgp4RouteMapSetOrigin
brcdIp.1.2.11.14.1.1.12
Syntax: Integer Read-write Sets the BGP origin code.
snBgp4RouteMapSetTag
brcdIp.1.2.11.14.1.1.13
Syntax: Integer Read-write Specifies the tag for BGP routes.
snBgp4RouteMapSetWeight
brcdIp.1.2.11.14.1.1.14
Syntax: Integer Read-write Specifies the BGP weight for the routing table.
snBgp4RouteMapSetRowMask
brcdIp.1.2.11.14.1.1.15
Syntax: Integer Read-write This object is used together with the MIBs in the same
VARBIND to set and reset any MIBs in the table.
snBgp4RouteMapSetCommunityNu
ms
brcdIp.1.2.11.14.1.1.16
Syntax: OCTET STRING Read-write The community number is from 1 through 0xFFFFFFFF. The
incoming and outgoing list can have a maximum of 6 entries
each. This integer number is represented by four octets.
snBgp4RouteMapSetDampenHalfLi
fe
brcdIp.1.2.11.14.1.1.17
Syntax: Integer Read-write The BGP4 route map dampening half life.
snBgp4RouteMapSetDampenReus
e
brcdIp.1.2.11.14.1.1.18
Syntax: Integer Read-write The BGP4 route map dampening reuse.
Name, OID, and syntax Access Description