Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 561)

Unified IP MIB Reference 533
53-1002549-02
Chapter
51
Broadcast Forwarding Group
In this chapter
• General UDP broadcast forwarding group . . . . . . . . . . . . . . . . . . . . . . . . . . 533
• UDP broadcast forwarding port table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 533
• UDP helper table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 534
General UDP broadcast forwarding group
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, and Brocade
NetIron XMR devices.
UDP broadcast forwarding port table
NOTE
The following table is not supported on the Brocade MLXe router, Brocade NetIron MLX, and Brocade
NetIron XMR devices.
The following table contains a list of UDP port numbers for which forwarding UDP broadcast is
enabled.
Name, OID, and syntax Access Description
snRtUdpBcastFwdEnable
brcdIp.1.2.2.9
Syntax: RtrStatus Read-write Indicates if the UDP broadcast forwarding feature is enabled:
•
disabled(0) – When this object is set to disabled, entries in the
UDP broadcast forwarding port table are deleted.
•
enabled(1) – When UDP broadcast forwarding is enabled, default
entries are added to the UDP broadcast forwarding port table.
Default: enabled(1)
Name, OID, and syntax Access Description
snRtUdpBcastFwdPortTable
brcdIp.1.2.2.9.2.1 None The UDP broadcast forwarding port table.
snRtUdpBcastFwdPortIndex
brcdIp.1.2.2.9.2.1.1.1
Syntax: Integer Read-only The index of an entry in the UDP broadcast forwarding port table.
There can be up to 20 entries.