Ip vrrp mib definition, Vrrp and vrrp-extended mibs, Snvrrpgroupopermode – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 437: Snvrrpifstatechangetrap, Snvrrpifmaxnumvridperintf, Snvrrpifmaxnumvridpersystem, Chapter 42, Chapter

Advertising
background image

Unified IP MIB Reference

409

53-1002549-02

Chapter

42

IP VRRP MIB Definition

In this chapter

VRRP and VRRP-Extended MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 409

VRRP interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410

VRRP and VRRP-E interface table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411

VRRP virtual router table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411

VRRP and VRRP-E virtual router configuration table . . . . . . . . . . . . . . . . . 416

VRRP and VRRP-Extended MIBs

The following table contains the global objects that apply to Virtual Router Redundancy Protocol
(VRRP), Virtual Router Redundancy Protocol Extended (VRRP-E), and Virtual Switch Redundancy
Protocol (VSRP).

Name, OID, and syntax

Access

Description

snVrrpGroupOperMode
brcdIp.1.2.12.1.1
Syntax: Integer
NOTE: This object is supported

on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES,
and Brocade NetIron
CER series devices.

Read-write

Indicates if VRRP is enabled for this system:

disabled(0) – Disable VRRP.

enabled(1) – Activate VRRP.

Default: disabled(0)

snVrrpIfStateChangeTrap
brcdIp.1.2.12.1.2
Syntax: Integer
NOTE: This object is supported

on the Brocade MLXe,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES,
and Brocade NetIron
CER series devices.

Read-write

Indicates if the SNMP agent process has been enabled to
generate VRRP interface state change traps:

disabled(0)

enabled(1)

Default: enabled(1)
NOTE: The standard MIB “vrrpNotificationCntl” will work exactly

the same as the IronWare Proprietary MIB
"snVrrpIfStateChangeTrap”.

snVrrpIfMaxNumVridPerIntf
brcdIp.1.2.12.1.3
Syntax: Integer

Read-only

Indicates the maximum number of VRID per interface.

snVrrpIfMaxNumVridPerSystem
brcdIp.1.2.12.1.4
Syntax: Integer

Read-only

Indicates the maximum number of VRID per system.

Advertising