Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 270)

242 Unified IP MIB Reference
53-1002549-02
IP AS-Path access list table
IP AS-Path access list table
The IP forwarding cache provides a fast-path mechanism for forwarding IP packets. The cache
contains entries for IP destinations.
snRtIpFwdCacheAction
brcdIp.1.2.2.11.1.7
Syntax: Integer Read-only Indicates the action taken with this entry:
•
other(1)
•
forward(2)
•
forUs(3)
•
waitForArp(4)
•
complexFilter(5)
•
icmpDeny(6)
•
dropPacket(7)
snRtIpFwdCacheFragCheck
brcdIp.1.2.2.11.1.8
Syntax: Integer Read-only Indicates if fragmentation-needed is enabled:
•
disabled(0)
•
enabled(1)
NOTE: Devices cannot forward the packet without fragmenting it.
snRtIpFwdCacheSnapHdr
brcdIp.1.2.2.11.1.9
Syntax: Integer Read-only Indicates if Ethernet SNAP (also called IEEE 802.3) encapsulation
is enabled:
•
disabled(0)
•
enabled(1)
snRtIpFwdCacheVLanId
brcdIp.1.2.2.11.1.10
Syntax: Integer32 Read-only Shows the VLAN ID of an IP Forwarding Cache Table entry. A value of
zero indicates that no VLAN is associated with this entry.
snRtIpFwdCacheOutgoingIf
brcdIp.1.2.2.11.1.11
Syntax: Integer Read-only Shows the outgoing interface that will be used to forward packets.
An value of zero indicates that no outgoing interface is associated
with this entry.
Name, OID, and Syntax Access Description
Name, OID, and Syntax Access Description
snIpAsPathAccessListTable
brcdIp.1.2.2.12 None The IP AS-Path access list table.
snIpAsPathAccessListIndex
brcdIp.1.2.2.12.1.1
Syntax: Integer32 Read-only The table index for a filter entry.
snIpAsPathAccessListSeque
nce
brcdIp.1.2.2.12.1.2
Syntax: Integer32 Read-write The table sequence index for a filter entry.
snIpAsPathAccessListAction
brcdIp.1.2.2.12.1.3
Syntax: Integer Read-write The action to take if the BGP address matches with this filter.