Vsrp traps, Sntrapvsrpstatechange, Sntrapvsrpcamerror – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual
Page 722: Ospf traps
694
Unified IP MIB Reference
53-1002549-02
Proprietary traps
VSRP traps
The following traps can be used by the devices that support VSRP.
OSPF traps
The Brocade NetIron MLX, Brocade MLXe, Brocade NetIron XMR, Brocade NetIron CES, and
Brocade NetIron CER series devices support RFC 1850 and the objects in the following table are
not supported.
NOTE
You must configure the log adjacency command under the "router ospf" mode to see traps for the
following objects:
ospfIfStateChange trap
ospfNbrStateChange trap
ospfVirtIfStateChange trap
ospfVirtNbrStateChange trap
Trap name and number
Varbinds
Severity
Description
snTrapVsrpStateChange
brcdIp.0.83
snAgGblTrapMessage Informational A VSRP routing device changed its state.
snTrapVsrpCamError
brcdIp.0.84
snAgGblTrapMessage Informational A VSRP CAM error has occurred.