Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 506)

478 Unified IP MIB Reference
53-1002549-02
BGP4 general variables
snBgp4GenConfedPeers
brcdIp.1.2.11.1.41
Syntax: OCTET STRING
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Specifies the sub-AS numbers that are members of the
confederation. There is a maximum of 50 peers.
This is a number from 1 to 0xFFFF. It is represented by two
octets.
snBgp4GenDampening
brcdIp.1.2.11.1.42
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Specifies the dampening of BGP4 in the device:
•
none(0) – BGP4 dampening is off.
•
parameters(1) – Parameters are configurable.
•
routemap(2) – The route map is configurable.
snBgp4GenDampenHalfLife
brcdIp.1.2.11.1.43
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Specifies the number of minutes after which the route’s
penalty becomes half its value.
snBgp4GenDampenReuse
brcdIp.1.2.11.1.44
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Specifies how low a route’s penalty must be before the route
becomes eligible for use again after being suppressed.
snBgp4GenDampenSuppress
brcdIp.1.2.11.1.45
Syntax: Integer
NOTE: This object is not supported
on the Brocade MLXe router,
Brocade NetIron MLX,
Brocade NetIron XMR,
Brocade NetIron CES, and
Brocade NetIron CER series
devices.
Read-write Specifies how high a route’s penalty can be before the Layer
3 Switch suppresses the route.
Name, OID, and syntax Access Description