Snnetflowaggregationenable, Snnetflowaggregationrowstatus, Netflow export interface table – Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) User Manual

Page 318: Snnetflowiftable, Snnetflowifindex, Snnetflowifflowswitching, Sflow, Sflow collector table, Snsflowcollectortable, Snsflowcollectorindex

Advertising
background image

290

Unified IP MIB Reference

53-1002549-02

sFlow

NetFlow Export interface table

The following table contains information about the switching type in every NetFlow Export interface.

sFlow

This section presents the sFlow objects that are proprietary to products.

sFlow collector table

Currently, RFC 3176 allows only one sFlow destination to be configured. To configure two or more
destinations, use the following table.

snNetFlowAggregationEnable
brcdIp.1.1.3.18.3.1.8
Syntax: Integer

Read-write

Indicates if NetFlow Export aggregation for this
aggregation scheme is enabled:

disabled(0)

enabled(1)

Default: disabled(0)

snNetFlowAggregationRowStatus
brcdIp.1.1.3.18.3.1.9
Syntax: Integer

Read-write

Creates or deletes a NetFlow Export aggregation table
entry:

other(1)

valid(2)

delete(3)

create(4)

Name, OID, and syntax

Access

Description

snNetFlowIfTable
brcdIp.1.1.3.18.4

None

Shows a list of interface entries. The number of entries is given by
the value of ifNumber.

snNetFlowIfIndex
brcdIp.1.1.3.18.4.1.1
Syntax: Integer

Read-only

Shows a unique value, greater than zero, for each interface.
Valid values: 1 – 65536
It is recommended that values are assigned contiguously starting
with 1. The value for each interface sub-layer must remain constant
at least from one re-initialization of the entity’s network
management system to the next re-initialization.

snNetFlowIfFlowSwitching
brcdIp.1.1.3.18.4.1.2
Syntax: Integer

Read-write

Indicates if flow switching in a particular interface is enabled:

disable(0)

enable(1)

Name, OID, and syntax

Access

Description

Name, OID, and syntax

Access

Description

snSflowCollectorTable
brcdIp.1.1.3.19.2

None

Table of sFlow collectors, beginning with the second collector.
Configure the first sFlow collector using the sFlowCollectorAddress
and sFlowCollectorPort objects in the RFC 3176 sFlowTable.

snSflowCollectorIndex
brcdIp.1.1.3.19.2.1.1
Syntax: Integer32

Read-only

The index to the sFlow collector table.

Advertising