Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 354)

326 Unified IP MIB Reference
53-1002549-02
Switch configuration summary group
The following table contains the objects for multi-slot trunk port configuration iftable.
Switch configuration summary group
The following object applies to all devices.
Name, OID, and syntax Access Description
snMSTrunkTable
brcdIp.1.1.3.6.2 None The multi-slot trunk port configuration table.
snMSTrunkPortIndex
brcdIp.1.1.3.6.2.1.1
Syntax: Integer32 Read-only Identifies the port that is the primary port of a trunk group.
For a module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For a module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.
snMSTrunkPortList
brcdIp.1.1.3.6.2.1.2
Syntax: OCTET STRING Read-write Contains a list of port indices that are members of a trunk group.
Each port index is a 16-bit integer in big-endian order. The first port
index must be the index of the primary port.
snMSTrunkType
brcdIp.1.1.3.6.2.1.3
Syntax: Integer Read-write Specifies if the ports are connected to a switch or a server:
•
switch(1)
•
server(2)
snMSTrunkRowStatus
brcdIp.1.1.3.6.2.1.4
Syntax: Integer Read-write Creates, deletes, or modifies an entry in this table:
•
invalid(1)
•
valid(2)
•
delete(3)
•
create(4)
•
modify(5)
Name, OID, and syntax Access Description
snMSTrunkIfTable
brcdIp.1.1.3.6.3 None The multi-slot trunk port configuration iftable.
snMSTrunkIfIndex
brcdIp.1.1.3.6.3.1.1
Syntax: Integer32 Read-only Identifies the port that is the primary port (IfIndex) of a trunk group.
For a module with Gigabit ports, the primary port is port 1, 3, 5, or 7.
For a module with 10/100 ports, the primary port is port 1, 5, 9, 13,
17, or 21.
snMSTrunkIfList
brcdIp.1.1.3.6.3.1.2
Syntax: OCTET STRING Read-write Contains a list of port indices that are members of a trunk group.
Each port index is a 16-bit integer in big-endian order. The first port
index must be the index of the primary port (ifindex).
snMSTrunkIfType
brcdIp.1.1.3.6.3.1.3
Syntax: Integer Read-write Specifies if the ports are connected to a switch or a server:
•
switch(1)
•
server(2)
snMSTrunkIfRowStatus
brcdIp.1.1.3.6.3.1.4
Syntax: Integer Read-write Creates, deletes, or modifies an entry:
•
invalid(1)
•
valid(2)
•
delete(3)
•
create(4)
•
modify(5)