Brocade Unified IP MIB Reference (Supporting FastIron Release 07.5.00) - Manual (Page 744)

716 Unified IP MIB Reference
53-1002549-02
Proprietary traps
Traps for stacking
The following table has traps for stacking that are supported only on the FastIron devices.
snTrapXfpSfpIncompatibleOp
tics
brcdIp.0.1009 snAgGblTrapMessage Alerts The optics are incompatible with the port
configuration.
snTrapTMLoggingStart
brcdIp.0.1015 snAgGblTrapMessage Informati
onal TM logging started, triggerred by an event.
snTrapTMLoggingStop
brcdIp.0.1016 snAgGblTrapMessage Informati
onal TM logging stopped because the storage is
full.
snTrapTMLoggingRestart
brcdIp.0.1017 snAgGblTrapMessage Informati
onal TM logging restarted after the log was
cleared.
snTrapSFMLinkDown
brcdIp.0.1100 snAgGblTrapMessage Warning A link from the LP Traffic Manager to an
SFM Fabric Element is down.
Sample trap message:
Fabric Monitoring Link Down :
SFM <num>/FE <num>/Link <num>,
LP <num>/TM <num>"
snTrapSFMLinkUp
brcdIp.0.1101 snAgGblTrapMessage Informati
onal A link from the LP Traffic Manager to an
SFM Fabric Element is up.
Sample trap message:
Fabric Monitoring Link Up :
SFM <num>/FE <num>/Link <num>,
LP <num>/TM <num>"
snTrapXfpSfpNotFoundryOpti
cs
brcdIp.0.1018
NOTE: This trap is also
supported on the
FastIron devices.
snAgGblTrapMessage Alerts The SNMP trap that is generated if the
optics vendor is not from Brocade.
snTrapOpticalMonitoringFoun
dryOpticsNotCapable
brcdIp.0.157 snAgGblTrapMessage Alerts The SNMP trap that is generated if optical
monitoring is enabled but the optic device
is not capable.
Sample trap message:
Brocade Trap: Optical
Monitoring Optics Not Capable
Trap name and number Varbinds Severity Description and trap message